Kopr-Kote® Industrial Copper Anti-Seize & Thread Lubricant – NSF H2
Investor Name:
Published Date:
Location:
Value:
Architecture:
About Project
Kopr-Kote® Industrial Copper Anti-Seize & Thread Lubricant – NSF H2
DESCRIPTION
A low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors.
KOPR-KOTE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting.
KOPR-KOTE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off.
FEATURES
◆ Lowers friction
◆ Not affected by contraction, expansion, or vibration
◆ Reduces wrench torque
◆ Will not run, drip, or settle out
◆ Permits reuse of fittings; saves stud, bolt, and nut replacement
◆ Contains no lead or zinc
◆ Available in convenient aerosol form (Aerosol not NSF H2)
AVAILABLE IN
14oz, 1/4 LB, 1/2 LB, 1 LB, 1 Gal, 2.5 Gal, 5 Gal
12oz (Aerosol)
SPECIFICATIONS
| Base Materials | Complex / Petroleum | |
| Friction / Nut-Factor |
(Nut-Factor) – 0.15 – 1” B7 Studs @ 80,000 psi Contact Stress | |
| 認證 |  |
Not classified as a marine pollutant – DOT Approval CA2004080025 NSF Registered H2 (No. 120923)* Conforms to MIL-PRF-907F Conforms to RAYTHEON spec M8656839 Type II |
| Service Rating | -65° to 1800°F
-54°C to 982°C |
|
