Kopr-Kote® Copper Anti-Seize & Thread Lubricant – NSF H2
Investor Name:
Published Date:
Location:
Value:
Architecture:
About Project
Kopr-Kote® Anti-Seize Copper Anti-Seize & Thread Lubricant – NSF H2
DESCRIPTION
A low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors.
KOPR-KOTE ANTI-SEIZE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting.
KOPR-KOTE ANTI-SEIZE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off.
_____________________________
• Available in convenient aerosol form.
(Aerosols that contain solid materials such as copper or aluminum are subject to clogging. If you experience clogging, remove the nozzle, shake the can for about 30 seconds, and put the nozzle back on the can. This should clear the clog.)
FEATURES
◆ Lowers friction
◆ Not affected by contraction, expansion, or vibration
◆ Reduces wrench torque
◆ Will not run, drip, or settle out
◆ Permits reuse of fittings; saves stud, bolt, and nut replacement
◆ Contains no lead or zinc
◆ Available in convenient aerosol form (Aerosol not NSF H2)
SPECIFICATIONS
| Base Materials | Complex / Petroleum | |
| Friction / Nut-Factor | (Nut-Factor) – 0.15 – 1” B7 Studs @ 80,000 psi Contact Stress | |
| 認證 |  | · NSF Registered H2 (No. 120923) · 符合MIL-PRF-907F · 符合RAYTHEON spec M8656839 Type II |
| Service Rating | -65°F to 1800°F -54°C to 982°C | |
AVAILABLE IN
14oz., 1/4 Lb, 1/2 Lb, 1Lb, 1 Gal, 2 Gal, 5 Gal
12oz.(aerosol)
VIEW MORE [ANTI-SEIZES & THREAD LUBRICANTS]
FURTHER READING: How to Choose the Right Anti-Seize (and Why it Matters)
